QD Style Bushings Type M - To be used with QD Sprockets or Pulleys; Quantity Discounts Needle Roller Bearing Bolt Center H = 2

Bolt Center H = 2 7/8"

Corrosion resistant stainless steel

48  Tooth

Size: 5V900

Overall Height  Z =2-1/32"

QD Style Bushings Type M - To be used with QD Sprockets or Pulleys; Quantity Discounts Needle Roller Bearing Bolt Center H = 2QD BUSHINGS TYPE M Choose your bore size above. To be used with QD Sprockets or Pulleys QD Bushings are precision machined tapered and fully split on one side. The taper bored QD Sprocket or Pulley easily fits over the tapered bushing, and tightening of the cap screws produces a tight press fit on the shaft. The sprocket is easily removed from the bushing by using the pull up bolts as jackscrews in the holes tapped in the rim of the sprocket.