RC MAKER 10022 - 4.8mm Turnbuckle Upper Arm Set (Raw Titanium) A12 Whilst these may not be

Whilst these may not be a large amount of weight

description: Generating 15g+ static wind pressure on the motor surface (NOT FLAT SURFACE)

The FBS set consists of two ball studs

The parts are 3D printed and very durable

The forward section

RC MAKER 10022 - 4.8mm Turnbuckle Upper Arm Set (Raw Titanium) A12 Whilst these may not beTurnbuckle Upper Arm Set for RC MAKER SP1 & SP1 F This set replaces the upper arms to allow a large range of adjustment for caster and camber. It is more rigid than the upper arm and provides greater initial response. If using this set, you will need to purchase a caster tool, and use a setup station which allows you to measure the caster. RCM SP 10022 Includes: 8x 9124 4. 8mm Open Ball Cups 8x 14101 3x28mm Titanium Turnbuckles 4x 3120 Outer