014-1066-050 - Follower plate for industrial pumps with shank 50 mm subgroup-Accessoires en losse onderdelen-Vet oplossingen The system is available at

The system is available at 220 or 440 liters capacity and can be integrated with flow meter for measuring diesel and the level probe

The operating pressure of the pumps can vary between a minimum of 3 bar and a maximum of 8 bar

Rigid polyethylene tank for diesel transport for non-commercial use eccept for ADR 1

The connection of the hose reel to the wall-fixing bracket is very fast and it allows a quick connection and disconnection

Inlet : F1/4"G

014-1066-050 - Follower plate for industrial pumps with shank 50 mm subgroup-Accessoires en losse onderdelen-Vet oplossingen The system is available atIt is advisable to use always the follower plate. it is very important of ambient temperature is low and when high viscosity grease is used. Because of the depression created by the pump. the plate is attracted towards the bottom of the drum by atmospheric pressure. It pushing the grease into the pump and avoids air cavities. Also it removes the grease remaining on the walls down to the bottom of the drums.