sp 77 2 16a01002 Pipework connection is via PN

Pipework connection is via PN 6/10 DIN flanges (EN 1092-2 and ISO 7005-2)

The mains cable is of the plug type with glass sealing compound in the socket to prevent penetration of humidity into the stator windings

the pump can be calibrated to the actual installation by means of a simple calibration function

and are suitable for liquids with low to medium viscosity

Deaeration of pump head during start up 4

sp 77 2 16a01002 Pipework connection is via PNSubmersible borehole pump, suitable for pumping clean water. Can be installed vertically or horizontally. All steel components are made in stainless steel, EN 1. 4301 (AISI 304), that ensures high corrosive resistance. This pump carries drinking water approval. The pump is fitted with a 7. 5 kW MS6000 motor with sand shield, mechanical shaft seal, water lubricated journal bearings and a volume compensating diaphragm. The motor is a canned type