TLS Quad Coupler 1.5 Finish:Black The clutch replacement kit is

The clutch replacement kit is used with Next-Gen Lodestar D8+ Models L & R

These cartridges are installed on Terminal Strip Segments in Next-Gen Lodestar contactors

and virtually no “Sit Back

This positive identification increases safety and aids in the inspection process

- ANSI Z359

TLS Quad Coupler 1.5 Finish:Black The clutch replacement kit isThe Quad Coupler 1. 5 will clamp from 1. 25 OD to 1. 5 OD tubing, as well as 1" pipe (1. 315" OD.) The Quad Coupler 1. 5 is 1. 25" thick. The notch on the outside of clamp is 1. 26" across the flats and will fit over 1 1 4" square tube, while locking the clamp parallel with the 1 1 4" square tubing. Use the flat face to bolt to a fixture, or to allow the Quad Coupler 1. 5 to rotate when fastened to square tubing. The distance from the bottom of the